|Posted: 07 Aug 2003 23:32 Post subject: Worlds First Visual Mastering System
|FOR IMMEDIATE RELEASE
Earle Holder, Information
Paavo Jumppanen, Tech. Specs.
POWERFUL, NEW HARMONIC EQUALIZATION SOFTWARE PRODUCES FLAWLESS SOUND TRACKS 100% OF THE
TIME WITHOUT A MASTERING ENGINEER
Atlanta, Georgia - August 15, 2003 - Har-Bal International - a joint venture between
TAQUIS (Australia) and HDQTRZ Digital Studios (US) - announced today the release of
Har-Bal (Harmonic Balancer) A powerful, new mastering equalization system for all Windows
systems (95,98,ME, NT, 2000 or XP) that corrects inconsistencies in mixed track sound
files 100 percent of the time. Har-Bal will revolutionize the music industry by completely
eliminating the need to have a mastering engineer in the end process of music production.
The software is composed of two parts: a spectrum analysis engine and a high-resolution
linear phase digital filter to perform the EQ'ing so there is imperceptible degradation in
quality (i.e. noise wise). Har-Bal analyzes a recording, which gives a measure of the
average and peak spectrum content (displayed graphically) from which any user can easily
judge the spectral balance. Next, through a novel user interface, the software allows
you to design a matching digital filter. This differs from conventional approaches in that
you no longer need golden ears to judge the problem areas of a particular recording. The
spectrum measurement provides you with an accurate indication of any problems in the
recording. Har-Bal International is the first company to address the classes of
frequencies that have proven to be troublesome to the human body. Frequencies felt in the
body, i.e., low frequencies, with high amplitudes and throbbing, pulsing envelopes can
make listeners sick to their stomach...so the expression goes. There definitely seems to
some connection with the corrected resonant frequencies of a song that has been
harmonically balanced as opposed to mastering.
For an undetermined period of time, a restricted version of Har-Bal can be downloaded at
www.har-bal.com. You will no longer need to test your mastered CD in cars, boom boxes,
walkmans, etc. The software uses an 8192-point linear phase FIR filter whose
characteristics are designed to match and compensate for the average spectrum as closely
The degree to which you can boost and cut a particular region is essentially unlimited.
Har-Bal International has proven that by coupling spectrum analysis with linear phase
digital filtering, Har-Bal provides a powerful, yet functionally simple means of
re-adjusting the spectral balance of sound recordingsbe they original new masters or
re-masters of existing works.
Har-Bal International is currently working on a plug-in version for individual tracks.
Har-Bal has definitely taken the pain out of mastering music and will prove to be a
necessary tool in any producer or engineer's studio. Har-Bal International may very well
be the next Microsoft of the music industry. Their product really works!
Let your Eyes be your Ears
|Posted: 03 Mar 2007 22:13 Post subject: Re: Worlds First Visual Mastering System
|isn't it funny, my audiophile friends, that this idea never took off?
since 2003, you'd have thought that the advances in technology, not least of which in the
audio business, would have made these "mastering-engineer-in-a-box" commonplace on just
about every pc running audio software, all around the globe! why, then, do we not master
everything ourselves? i'll tell you why... it's because you can't replace the skill of an
experienced, gifted mastering engineer. with ANYTHING!
sure, we might see wavelabs' software brandied about all the time, and sure, i'm a real
big fan of the L2 (both software AND hardware versions). but these items only make it
easier to master our bedroom-recorded tracks, which lets face it, will never see the light
of day, and only your mates will ever listen to them anyway!
saying that mastering engineers will be made redundant by a piece of new software is like
saying that a new synth will make all guitarists redundant. just because the tools are
there to do something in a relative and alternate manner, does NOT mean that the 'old'
ways are either outdated, or worthy of being replaced.
the sonic qualities of digital, by it's very nature, tend to give less warmth and feel
than trditional analogue. while many recordings today utilise digital from recording
stage, right through mixing and post, the final mastering is almost ALWAYS outsourced for
any commercial release. and these professional mastering engineers ALWAYS work in
so the software just isn't the same as the hardware older brothers of the mastering
domain, and just can't impart the same sense of feeling and harmonic distortion that we've
all grown to accept and love in music. and then we come to the fact that mastering
engineers generally have just about the best listening ears you will ever come accross.
let me ask, how many of you can pick a single frequency out of a wall of pink noise as it
is taken out? how many of you would be able to say that "we need about 2dB worth at 5k"?
(nb: for those who aren't aware, the average human ear percepts a 3dB increase in level as
the smallest increase that they can physically hear. most people will not even NOTICE if
you take a fader up by 2dB during a song!). i'd guess next to no-one! and if the
finely-honed skills of a talented and gifted mastering engineer are what's going to give
me half a million album sales over a demo that MIGHT get me a gig sometime, i know which
option i'm taking!
for the record, i'm a freelance FOH engineer, working with bands from all over the shop.
i've worked as a recording engineer, and done my fair share of mixing and post work as
well. but while all the bands i've worked with might mess around with recording demos in
their home studios every once in a while, they've ALWAYS, without fail given over their
tapes for mastering at the completion of album tracking. and i dare say, they always
will...! i know that in all my experience, i'm still not good enough to say that i could
master at the levels of the Rick O'Neils of this world. i wish i were, but most of us
anyone who wants to chat about engineering, and what it can do for your band, would do
well to contact an engineer and chat with them about it. find out what they they do at a
gig - do they "set and forget" and hope for the best, or do they actually listen to your
show, HELPING make your gig a success? why do they use some of the equipment with all the
funny knobs and dials and guages on it? does it actually DO anything? if there's something
you want to know, find out. ask. don't live in the dark. drop me a line if you like, and
if i can't help you, i'll help you find someone who can!
i'll finish by saying that machines simply CAN'T be made that have that touch of whatever
it is that makes a band sound just right. remember that "true perfection has to be
imperfect, i know that that sounds foolish but it's true" - Noel Gallagher, Oasis, "Little
i hope now that my little rant ia over, but i'd love to hear anyone else's opinions on
technology, how we use it to best effect, why planes can stay in the air, and why speed
was such a crap movie! if you have anything to add to any of these threads, drop me a line
||All times are GMT + 9 Hours
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You can vote in polls in this forum
The URI to trackback this topic is:
Some parts of this forum are powered by phpBB 2.0.4 © 2001, 2002 phpBB Group
- Modified for SPRACI by Michael MD